How To Display Target Data; How To Remove Target Data - Furuno FAR-2218-BB Operator's Manual

3.10.2

How to display target data

Place the cursor on a desired tracked target and press the ACQ key. The target's
shape changes to a square and the selected TT target's data is shown in the data dis-
play area.
Indication
BRG Bearing from own ship to target in relative (R) or
True (T) reference.
RNG Range from own ship to target.
T COG Relative (R) or True (T) Course Over Ground of
target.
Displayed as "T CTW" where speed input is set to
[LOG(WT)].
Displayed as "R CRS" where speed data is not
available.
T SOG Relative (R) or True (T) Speed Over Ground of
target.
Displayed as T STW where speed input is set to
[LOG(WT)].
Displayed as R SPD where speed data is not
available.
CPA Closest Point of Approach of target to own ship.
TCPA Time to CPA of target to own ship.
BCR Bow crossing range of target.
BCT Bow crossing time of target.
You can display the target data for up to six targets in 2 columns with 3 sets of target
data per row.
If your display unit is a MU-270W, you can show up to 9 targets' data in 3 columns with
3 sets of target data per row.
3.10.3

How to remove target data

Place the cursor on a desired tracked target and press the TARGET CANCEL key.
The select target's data is removed from the data display area.
Description
3. TARGET TRACKING (TT)
Target Target
number name*
001 TEST1 002
*: Target name is shown for
B-types only and requires the
[ TARGET NAME FUNCTION ] in
the [ TT ] menu to be set to [ ON ] .
3-11