Furuno FAR-2218-BB Operator's Manual page 228

APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
ALR ALF
Alert ID Alert ID
48 194,7
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
727 194,8
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
781 194,9
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
783 194,10
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
784 194,11
Remedy: Press the ALARM ACK key. Check IP settings and assign a unique IP address.
785 194,12
Remedy: Press the ALARM ACK key. Check IP settings and assign a unique IP address.
495 52495,1
Remedy: Press the ALARM ACK key. Confirm Own Ship location and adjust as necessary.
- 52540,1
Remedy: Press the ALARM ACK key. Check power to AIS unit.
450 52601,1
Remedy: Press the ALARM ACK key. Match the on-screen indication with the actual gyrocompass.
278 52601,2
Remedy: Press the ALARM ACK key. Check SDME sensor. Use a different sensor if necessary.
284 52601,3
Remedy: Press the ALARM ACK key. Check SDME sensor. Use a different sensor if necessary.
AP-12
Alert title
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
ANCHOR WATCH
AIS MSG
SENSOR ERROR
1
SENSOR ERROR*
2
SENSOR ERROR*
Priority &
Category
Warning Message: "TUNE ERROR"
Cat: B Meaning: TUNE error due to faulty set-
tings or malfunction.
Warning Message: "RADAR ANT COM ER-
Cat: B ROR"
Meaning: Signal between processor
and antenna interrupted/lost.
Warning Message: "MTR-DRV COM ERROR"
Cat: B Meaning: Signal between antenna's
SPU and MTR-DRV interrupted/lost.
Warning Message: "RF-CONVERTER COM
Cat: B ERROR"
Meaning: Signal between antenna's
SPU and RF-CONVERTER interrupt-
ed/lost.
Warning Message: "LAN1 NETWORK ERROR"
Cat: B Meaning: LAN1 IP address is use by
other equipment.
Warning Message: "LAN2 NETWORK ERROR"
Cat: B Meaning: LAN1 IP address is use by
other equipment.
Warning Message: "OUT OF ANCHOR
Cat: B WATCH ZONE"
Meaning: Ship position outside set an-
chor watch zone.
Caution Message: "TRANSMIT ERROR"
Cat: B Meaning: Unable to transmit AIS bina-
ry message.
Warning Message: "NO GYRO SIGNAL"
Cat: B Meaning: No heading information re-
ceived from gyrocompass for five sec-
onds.
Warning/ Message: "NO LOG(WT) SINGAL"
Caution Meaning: No speed data received for
Cat: B five seconds when [LOG(WT)] is set as
speed reference.
Warning/ Message: "NO LOG(BT) SIGNAL"
Caution Meaning: No speed data received for
Cat: B thirty seconds when [LOG(BT)] is set
as speed reference.
Alert description