5. VIDEO PLOTTER OPERATION
5.2.5
How to inscribe marks
You can inscribe marks anywhere inside the operational display area, however, marks
cannot be inscribed in the same location as a menu box.
Depending on the setting for [4 MARK POSITION] the method to inscribe a mark is
slightly different.
Where [4 MARK POSITION] is set to [CURSOR]
1. Place the cursor inside the [MARK] box. The [MARK] box is now highlighted.
2. Spin the scrollwheel to select the appropriate mark, then left-click. The cursor
moves inside the operational display area.
3. Place the cursor on the location (inside the operational display area) you wish to
inscribe the mark, then left-click to anchor the mark.
4. Repeat steps 1 to 3 for multiple mark inscription, or right-click to complete the pro-
cedure.
Where [4 MARK POSITION] is set to [OWN SHIP]
1. Place the cursor inside the [MARK] box. The [MARK] box is now highlighted.
2. Spin the scrollwheel to select the appropriate mark, then left-click. The selected
mark is inscribed at the OS position.
3. Repeat steps 1 to 2 for multiple mark inscription, or right-click to complete the pro-
cedure.
Where [4 MARK POSITION] is set to [L/L]
1. Place the cursor inside the [MARK] box. The [MARK] box is now highlighted.
2. Spin the scrollwheel to select the appropriate mark, then left-click. RADAR MAP
menu appears and the first digit of the latitude is selected.
3. Referring to section 5.2.4, set the latitude and longitude.
4. Repeat steps 1 to 3 for multiple mark inscription, or right-click to complete the pro-
cedure.
5.2.6
How to set origin mark stabilization
Origin marks can be geographically fixed (ground stabilized) or moving (sea stabi-
lized).
1. Select the [MARK] box at the bottom-left of the screen then right-click to open the
[RADAR MAP] context menu.
2. Select [2 ORIGIN MARK STAB].
3. Select [GND] or [SEA] as appropriate, then press the ENTER MARK key.
4. Close the menu.
5-4