True Or Relative Bearing - Furuno FAR-2218-BB Operator's Manual

On-screen menu box operation
1. Select the appropriate EBL box.
2. The guidance box reads "EBL ON/". Press the left button to turn on the EBL.The
guidance box now reads "EBL SET L=DELETE /".
3. Press the left button again and the cursor jumps to inside the operational display
area. The guidance box now reads "EBL FIX L=DELETE/".
4. Rotate the ADJUST knob clockwise or counterclockwise until the active EBL bi-
sects the target of interest, then push the ADJUST knob to anchor the EBL. Read
the bearing at the lower-left corner of the screen.
5. Press the EBL OFF key to erase EBLs.
1.33.2

True or relative bearing

The EBL readout is affixed by "R" (relative) if it is relative to own ship's heading, "T"
(true) if it is referenced to the north. True or relative indication is available regardless
of presentation mode.
1. Open the menu.
2. Select [3 NAV TOOLS].
3. Select [3 EBL•VRM•CURSOR SET].
4. For IMO/A/R-type radars, select [5 EBL•CURSOR BEARING].
For B-type radars, select [2 EBL1] or [3 EBL2] as appropriate.
5. Select the [REL] or [TRUE] as required, then press the ENTER MARK key.
6. Close the menu.
Note: The EBL and its indication change according to gyrocompass changes as fol-
lows:
Gyro heading
HEAD UP / relative
HEAD UP / true
COURSE UP / relative
COURSE UP / true
NORTH UP / relative
NORTH UP / true
EBL changes
EBL indication and EBL marker are unchanged.
EBL indication does not change, however the EBL
marker moves accordingly
EBL indication does not change, however the EBL
marker moves accordingly.
EBL indication and EBL marker are unchanged.
EBL indication does not change, however the EBL
marker moves accordingly
EBL indication and EBL marker are unchanged.
1. OPERATIONAL OVERVIEW
1-51