How To Display Navigational Data; How To Use The Information Box - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.45.2

How to display navigational data

1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select [DISPLAY NAV DATA].
4. Select [ON] to display navigational data, [OFF] to hide navigational data, then
press the ENTER MARK key.
5. Close the menu.
1.46

How to Use the Information Box

The information box shows target data, navigational data and zoomed areas of the ra-
dar display. To set up the information box, do the following:
1. Open the menu.
2. Select [7 INFORMATION BOX].
3. Select and set the appropriate menu item, referring to the table below.
4. Close the menu.
Menu item
[2 OWN SHIP INFO]
[3 DISPLAY NAV DATA]
[4 NAV DATA SETTINGS] See section 1.45
[5 ZOOM]
[6 ZOOM DISPLAY]
[7 TARGET DATA]
1-82
Settings
See section 1.11, Set up various own ship information,
section 1.12 and such as sensors used for position fix,
section 1.13 for date and time format/offsets, heading
details. and speed sensors used.
• OFF • Disable navigational data display.
• ON • Enable navigational data display.
Set up the format in which various
for details. navigational data is displayed in the
[INFORMATION BOX].
• OFF • Disable zoom magnification.
• 2TIMES • Set zoom magnification at 2 .
• 3TIMES • Set zoom magnification at 3 .
• STAB GND • Ground stabilized zoom (Geo-
• STAB HDG • Heading stabilized zoom (Relative).
• STAB NORTH • North stabilized zoom (True).
• TT TRACK • Tracked targets are zoomed.
• 1BOX See the figure on the following page.
• 2BOX
• 3BOX
• LARGE
Description
graphically fixed).