How To Adjust The Date And Time - Furuno FAR-2218-BB Operator's Manual

1.14

How to Adjust the Date and Time

Date and time are displayed at the top-right of the screen in the DATE/TIME box. You
can left-click the date/time format indication to toggle between [UTC] format and [LO-
CAL] format.
Date/time format indication
Left-click: Toggle UTC and LOCAL time.
Right-click: Open the [ DATE ] menu.
You can also adjust the local time and switch between time formats from the menu.
To adjust the local time, follow the procedure below.
1. Place the cursor on the Date/time format indication in the [DATE/TIME] box, then
right-click to show the [DATE] menu.
Back to [ OWN SHIP INFO ] menu
2. Select [2 DATE-TIME], then select [UTC] or [LOCAL] as appropriate.
• [UTC]: Date and time are displayed in UTC format.
• [LOCAL]: Date and time are shown with the local time offset applied.
3. Select [3 ADJUST LOCAL TIME], then press the ENTER MARK key.
Time indication highlighted as a whole.
Toggle between "+" and "-" is possible.
4. Spin the scrollwheel, or use the number keys to input the desired offset.
The offset must be in 30 minute increments.
Note: Regarding input for [3 ADJUST LOCAL TIME], when using the number
keys, the indication is first selected as a whole. At this time, you can toggle be-
tween plus "+" or minus "-". Press the 8 key for "-", press the 2 key for "+". If single
digits are highlighted, toggle is not possible. In this case, press the CANCEL
TRAILS key to re-highlight the whole indication.
5. Close the menu.
Date and time format
Local time offset
1. OPERATIONAL OVERVIEW
Date
19 / SEP / 2016
15 15
Single digit is highlighted. Toggle
between "+" and "-" is not possible.
Time
1-21