Furuno FAR-2218-BB Operator's Manual page 5

WARNING
ELECTRICAL SHOCK HAZARD.
Do not open the equipment.
Only qualified personnel should
work inside the equipment.
Turn off the radar power switch
before servicing the antenna
unit. Post a warning sign near
the switch indicating it should
not be turned on while the
antenna unit is being serviced.
Prevent the potential risk of being
struck by the rotating antenna
and exposure to RF radiation
hazard.
Do not disassemble or modify
the equipment.
Fire, electrical shock or serious
injury can result.
Immediately turn off the power
at the ship's mains switchboard
if water leaks into the equip-
ment or the equipment is emit-
ting smoke or fire.
Continued use can cause fatal
damage to the equipment.
SAFETY INSTRUCTIONS
WARNING WARNING
Use the proper fuse.
Use of a wrong fuse can result
in damage to the equipment or
cause fire.
Keep heater away from equipment.
Heat can alter equipment shape
and melt the power cord, which
can cause fire or electical shock.
Do not place liquid-filled con-
tainers near the equipment.
Fire or electrical shock can result
if a liquid spills into the equipment.
Do not operate the equipment
with wet hands.
Electrical shock can result.
Before servicing the radar, turn
off the appropriate external
breaker.
Power is not removed from the
radar simply by turning off its
power switch.
This equipment has a valid
latitude range of 85°N to 85°S.
Operation outside of this range
can result in a larger margin of
error when calculating position,
heading, bearing, etc.
iii