How To Use Ais Messages; How To Create And Save Messages - Furuno FAR-2218-BB Operator's Manual

4. AIS OPERATION
4.17

How to Use AIS Messages

You can transmit and receive messages via the AIS, to a specified destination (MMSI)
or all ships in the area. Messages can be sent to warn of safety of navigation, for ex-
ample, an iceberg sighted. Routine messages are also permitted.
Short safety related messages are only an additional means to broadcast safety infor-
mation. They do not remove the requirements of the GMDSS.
4.17.1

How to create and save messages

Up to ten messages can be saved at any time. To create and save a message, do the
following:
Note: The MMSI of the receiving ship can be automatically set by selecting [TRANS-
MIT MESSAGE] from the pop up menu. To show the pop up menu, select the receiv-
ing ship's data in the AIS data display area, then press the right button.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 AIS].
4. Select [5 TRANSMIT MESSAGE].
5. Select [2 ADDRESS TYPE].
6. Select [ADDRESSED] (message for a specific MMSI.
Automatically selected if the MMSI is automatically
using the data display.) or [BROADCAST] (message
to all AIS-equipped vessels within the area), then press the ENTER MARK key.
7. Select [3 MESSAGE TYPE].
8. Select [SAFETY] (for safety messages) or [BINARY] (for routine messages), then
press the ENTER MARK key.
9. For [ADDRESSED] message, do this step. For [BROADCAST] message, or if
[TRANSMIT MESSAGE] was selected from the AIS data display pop up menu, go
to step 8.
1) Select [4 MMSI No.].
2) Use the number keys to set the receiving ship's MMSI.
10. Select [5 CHANNEL].
11. Select the AIS channel to transmit your message over: [A], [B], [A or B], or [A and
B], the press the ENTER MARK key.
12. Select [0 NEXT] to show the next menu page.
13. Select [4 EDIT]. A software keyboard appears at the
bottom of the menu.
14. Select the character desired, then left-click.
The maximum of 80 characters can be entered for the message.
15. Select [END] to complete message input, then left-click.
4-20