Furuno FAR-2218-BB Operator's Manual page 231

ALR ALF
Alert ID Alert ID
Remedy: Press the ALARM ACK key. Have a qualified technician check the fan.
- 52001,21 HW STATUS NO-
Remedy: Press the ALARM ACK key. Lower the temperature.
- 52001,22 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the motor.
- 52001,23 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the motor.
- 52001,24 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power supply.
- 52001,25 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the hall sensor.
- 52001,26 HW STATUS NO-
Remedy: Press the ALARM ACK key. Unlock the antenna.
- 52001,27 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power supply.
- 52001,28 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the antenna brake.
- 52001,29 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the motor.
- 52001,31 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power supply.
APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
Alert title
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
Priority &
Category
Caution Message: "MTR-DRV:TEMP HIGH"
Cat: B Meaning: MTR-DRV board tempera-
ture is above limit.
Caution Message: "MTR-DRV:OVER CUR-
Cat: B RENT"
Meaning: MTR-DRV board power in-
put from the motor is outside rating.
Caution Message: "MTR-DRV:MOTOR POW-
Cat: B ER ERROR"
Meaning: MTR-DRV board motor's
voltage is outside rating.
Caution Message: "MTR-DRV:P12V POWER
Cat: B ERROR"
Meaning: Voltage in the +12V line of
the MTR-DRV motor is outside rating.
Caution Message: "MTR-DRV:HALL SENSOR
Cat: B ERROR"
Meaning: Error in the hall sensor signal
detected by the MTR-DRV board.
Caution Message: "MTR-DRV:ANTENNA
Cat: B LOCK"
Meaning: Antenna lock detected by the
MTR-DRV board.
Caution Message: "MTR-DRV:POWER SUP-
Cat: B PLY ERROR"
Meaning: MTR-DRV board detected
an drop in power.
Caution Message: "MTR-DRV:BRAKE RESIS-
Cat: B TANCE ERROR"
Meaning: MTR-DRV board detected
an error in the brake resistance.
Caution Message: "MTR-DRV:OVERLOAD"
Cat: B Meaning: MTR-DRV board detected
an overload.
Caution Message: "PM:P12V POWER ER-
Cat: B ROR"
Meaning: Voltage in the +12V line of
the PM board is outside rating.
Alert description
AP-15