16How To Delete Origin Marks; Drop Mark - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
Where [4 MARK POSITION] is set to [L/L]
1. Place the cursor inside the [MARK] box. The [MARK] box is now highlighted.
2. Spin the scrollwheel to select the appropriate origin mark, then left-click. RADAR
MAP menu appears and the first digit of the latitude is selected.
3. Referring to section 1.42.3, set the latitude and longitude.
4. Repeat steps 1 to 3 for multiple origin mark inscription, or right-click to complete
the procedure.
When an origin mark is inscribed, the MARK box shows the range and bearing from
own ship to the origin mark.
1.42.16 How to delete origin marks
Unlike other marks, you can only delete origin marks individually. To delete origin
marks, follow the procedure below.
1. Select the operational display area, then right-click to show the [CURSOR] con-
text menu.
2. Select [MARK DELETE]. The cursor changes to a highlighted cursor.
3. Place the highlighted cursor on the origin mark to be deleted, then left-click.
4. Repeat step 3 to delete another origin mark, or press the right button to return
the cursor to normal function.
1.43

Drop Mark

The operator can inscribe a drop mark at a selected location to find the range and
bearing from own ship to the mark. This can be useful for marking a point to avoid
while navigating to a destination.
To active the drop mark feature, do the following:
1. Open the menu.
2. Select [2 MARKS].
3. Select [4 DROP MARK].
4. Select [ON] to enable [DROP MARK]. Two indications appear at the bottom of the
screen.
5. Close the menu.
1-78
Drop mark boxes show the mark number,
bearing and range to the mark.