How To Display Ais Target Data; Ais Pop-Up Information - Furuno FAR-2218-BB Operator's Manual

4. AIS OPERATION
9. Select [4 DESTINATION], then left-click. The software keyboard appears.
10. Use the trackball to highlight a letter or digit on the software keyboard, then left-
click. Repeat until the destination name is entered. (Max. 20 characters)
11. Use the trackball to highlight [END] on the software keyboard, then left-click.
12. Select [5 DRAUGHT].
13. Spin the scrollwheel to set the ship's draught, then left-click.
14. Select [6 PERSONS].
15. Spin the scrollwheel to set the number of crew on-board, then left-click.
16. Close the menu.
4.9

How to Display AIS Target Data

You can display an AIS target's data by selecting it on the display, when the AIS func-
tion is set for [AIS DISP FILT].
4.9.1

AIS pop-up information

The AIS pop-up shows abbreviated AIS data (COG, SOG, CPA, TCPA and destina-
tion) for the selected AIS target. Simply put the cursor on the AIS target to show the
pop-up. The pop-up can be enabled or disabled with the following procedure.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [4 TT•AIS SYMBOL].
4. Select [8 AIS POP UP INFO].
5. Select [ON] or [OFF] as appropriate.
6. Close the menu.
4-10