Menu Operations; How To Open And Close The Main Menu; How To Operate The Menus - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.5

Menu Operations

1.5.1

How to open and close the main menu

The main menu can be accessed from the control unit or from the on-screen box. The
[MAIN MENU] appears in the information box at the right side of the screen.
From the control unit (RCU-014)
Press the MENU key on the control panel.
From the on-screen box
Select the [MENU] box, then press the left button.
Navigation tools (PI lines/EBL/VRM)
Sets up the radar; changes function key settings
Note: For the sake of abbreviation in procedures, the above methods are written col-
lectively as "Open the menu." and "Close the menu."
1.5.2

How to operate the menus

1. Open the menu.
2. Roll the scrollwheel to select a menu item, then left-click. The menu item currently
selected is highlighted and shown in reverse video. You can also select a menu
item by pressing the corresponding numeric key on the control unit.
Menu selection is
highlighted and in
reverse video.
The next menu layer appears. Menu items with arrows, as shown in the above ex-
ample figure, have their own menu layer. You can select these items to show the
respective menu.
1-10
Echo processing functions
Manages marks and tracks
Sets target alarm functions
Sets TT and AIS functions
Manages stored data
Sets data display box items
Processes nav lines and waypoints
Select menu items with arrows ( ) to access the next menu layer.
In this example, the [ECHO] menu is accessed, then the
[CUSTOMIZED ECHO] menu is accessed.