How To Clear The Interswitch - Furuno FAR-2218-BB Operator's Manual

1. OPERATIONAL OVERVIEW
Radar Functions
AIS function
Brilliance
Echo trails
EBL
Lat/long data
Presentation mode
Speed data
Target alarm
TT, AIS on/off
TT, AIS track interval
Vector mode
Vector time
VRM
Wiper
Zoom
TT COLLISION
alarm
Range
(Sampling at Master)
A/C SEA
A/C RAIN
Automatic Clutter
Elimination (ACE)
Gain
IR*
Echo stretch
Echo averaging
Picture setting
(Customize echo)
STBY/TX
Tuning
Reference Point
TT LOST warning
TT alerts ACK
TT acquire
TT/AIS AZ
*: When the connected radar antenna is a FAR-3000 magnetron-type, and the radar
is assigned as "Slave", the desired value can be set for these functions. For FAR-3000
SSD-types, these function cannot be controlled.
1.47.3

How to clear the interswitch

You can clear the interswitch settings by following the procedure below.
1. Place the cursor on the [ANTENNA] box, then right-click to show the [SELECT
ANTENNA] menu.
2. Select [0 CLEAR INTER-SWITCH].
3. Select [YES] to clear the interswitch settings. The antenna settings are restored
to default.
1-86
Control Master Display Option
Independent Desired value can be set
Independent Desired value can be set
(Echo Sampling at Master
Range)
Desired value can be set
Dependent Desired value can be set
Control
Independent Desired value can be set
Common Item Commonly Controlled Item Commonly Controlled
Control
Slave Display Option
Desired value can be set
Desired value can be set
Cannot control
Desired value can be set