Furuno FAR-2218-BB Operator's Manual page 232

APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
ALR ALF
Alert ID Alert ID
- 52001,32 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the PM board.
- 52001,41 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power.
- 52001,42 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the power.
- 52001,43 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
- 52001,44 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
- 52001,45 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
- 52001,46 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the RF-Converter.
- 52001,47 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the HPA board.
- 52001,48 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the HPA board.
- 52001,51 HW STATUS NO-
Remedy: Press the ALARM ACK key. Have a qualified technician check the HPA board.
- 52001,52 HW STATUS NO-
AP-16
Alert title
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
TICE
Priority &
Category
Caution Message: "PM:PLL UNLOCK"
Cat: B Meaning: PM board's PLL is unlocked.
Caution Message: "RF-CONV:P6V POWER
Cat: B
ERROR"*
Meaning: Voltage in the +6V line of the
RF-Converter is outside rating.
Caution Message: "RF-CONV:P48V POWER
Cat: B
ERROR"*
Meaning: Voltage in the +6V line of the
RF-Converter is outside rating.
Caution Message: "RF-CONV:IF PLL UN-
Cat: B
5
LOCK"*
Meaning: PLL lock on the IF side of the
RF-Converter is unlocked.
Caution Message: "RF-CONV:PLL UN-
Cat: B
5
LOCK"*
Meaning: PLL lock on the RF side of
the RF-Converter is unlocked.
Caution Message: "RF-CONV:OUTPUT SIG-
Cat: B
NAL LEVEL ERROR"*
Meaning: Signal output from the RF
Converter is outside rating.
Caution Message: "RF-CONV:INTPUT SIG-
Cat: B
NAL LEVEL ERROR"*
Meaning: Signal input to the RF Con-
verter is outside rating.
Caution Message: "HPA:OUTPUT SIGNAL
Cat: B
LEVEL ERROR"*
Meaning: Signal output from the HPA
board is outside rating.
Caution Message: "HPA:OUTPUT PEAK CUR-
Cat: B
RENT ERROR"*
Meaning: Peak current detected in the
signal output from the HPA board.
Caution
Message: "HPA:TEMP HIGH"*
Cat: B
Meaning: Excessively high tempera-
ture detect on the HPA board.
Caution
Message: "VSWR ERROR"*
Cat: B
Meaning: Abnormal VSWR detected
by the RF Converter.
Alert description
5
5
5
5
5
5
5
5