Using The Optional Ac Adapter For Power - SATO MB200i Operator's Manual

Setup

Using the optional AC Adapter for power

If the optional AC adapter was purchased, the
printer may be operated on AC power instead of
with the supplied battery pack. Follow the steps
below:
1. Remove printer's DC
input jack cover and plug
the AC adapter's DC
output terminal to its
connector.
2. Connect the AC adapter
to the wall outlet and
power on. The POWER
lamp on the adapter lights
green.
Notes:
Ensure to power off the printer when disconnecting
the AC adapter from the printer or power source or
the information stored in the printer may not be
updated.
2-10