Basic Man Machine Interface - Bmm; Usage; Constants And Types - Leica TPS1200 Series Reference Manual

GeoCOM Reference Manual
9 B M
ASIC AN

9.1 USAGE

The subsystem BMM (Basic Man Machine Interface) implements the low-level functions for the MMI. These are also
functions, which are relevant for controlling the display, keyboard, character sets and the beeper (signalling device). In
GeoCOM only the beep control functions are supported. The description of the IOS beep control functions is also in this
chapter, because there is a very close relationship to the BMM functions.

9.2 CONSTANTS AND TYPES

Constants for the signal-device
const short IOS_BEEP_STDINTENS = 100;
// standard intensity of beep expressed as
//a percentage
Leica TPS1200 / TS30 / TM30 – Version 1.50
M I
ACHINE NTERFACE
Basic Man Machine Interface – BMM
– BMM
89