Product Labels - Christie Inspire Series User Manual

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Notice! If not avoided, the following could result in property damage.
General hazard.
Laser labels
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Do not look into the projector lens when the laser is on. The bright light
may result in permanent eye damage.
This projector has been classified as Class 1 Laser Product-Risk Group
2 according to the IEC 60825-1:2014 and IEC 62471- 5:2015
standard.
Indicates a light hazard. Do not look directly into the lens. The extreme
high brightness can cause permanent eye damage.
Class 1 Laser Product-Risk Group 2 according to Class 1 IEC 60825-
1:2014 and IEC 62471-5:2015.
Mount above the heads of children.
The use of a ceiling mount is recommended with this product to place it
above the eyes of children.
Make sure to adjust the feet of the top projector before stacking to
avoid damage to the lower projector.
Introduction
13