Removing Actuator Knob Assembly Parts - CareFusion Alaris 8110 series Service Manual

DISASSEMBLY/REASSEMBLY (Continued)
5.2
5.2.22 Removing Actuator Knob Assembly
Parts
1. Use a small pair of needle-nose pliers to
gently pull Interrupter Flag from Actuator
Knob Assembly.
2. Remove screw to remove Slide Plate,
Compression Spring, and Pullrod Cam.
Interrupter Flag
Compression
Spring
Actuator Knob
CORRECTIVE MAINTENANCE
During Reassembly:
• Install Slide Plate and Compression
Spring onto Actuator Knob, compress
Spring with Pullrod Cam, then install
screw.
Screw
Pullrod Cam
Slide Plate
Alaris Syringe Module (8110 Series)
®
Alaris PCA Module (8120 Series)
®
Technical Service Manual
Syringe Module
5A-25