CORRECTIVE MAINTENANCE
PCA Module
DISASSEMBLY/REASSEMBLY (Continued)
5.2
5.2.24 Removing Actuator Knob Assembly
Parts
1. Use a small pair of needle-nose pliers to
gently pull Interrupter Flag from Actuator
Knob Assembly.
2. Remove screw to remove Slide Plate,
Compression Spring, and Pullrod Cam.
Interrupter Flag
5B-28
Alaris
Syringe Module (8110 Series)
®
Alaris
PCA Module (8120 Series)
®
Technical Service Manual
Compression
Spring
Actuator Knob
During Reassembly:
• Install Slide Plate and Compression
Spring onto Actuator Knob, compress
Spring with Pullrod Cam, then install
screw.
Screw
Pullrod Cam
Slide Plate