CORRECTIVE MAINTENANCE
PCA Module
DISASSEMBLY/REASSEMBLY (Continued)
5.2
5.2.11 Removing Latch Module and
Drivetrain Assembly
1. Remove two (
Bushings and remove Latch Module
from underside of Drivetrain.
2. Disassemble Latch Module parts (Latch
Bushing Supports, Latch Bushings,
Latch Rod).
Latch Lever
5B-14
Alaris
Syringe Module (8110 Series)
®
Alaris
PCA Module (8120 Series)
®
Technical Service Manual
) screws on Latch
2
Drivetrain
Assembly
3. Remove five (
Drivetrain Assembly to Front Case, and
remove Drivetrain Assembly.
During Reassembly:
• Ensure both legs of Latch Bushings seat
in the square cutouts on Drivetrain
bottom plate.
• Thread Latch Rod through Latch Lever.
Latch Module (Underside of
Drivetrain Assembly)
Latch Rod
Screw
) screws attaching
5
Latch Bushing
Support
Latch Bushing
Front Case