ILLUSTRATED PARTS BREAKDOWN
Syringe Module
Figure 7A-7.
Front Case, Syringe Barrel Clamp Assembly, Top Disk Holder -- Interchangeability
This figure illustrates a newer version of the Front Case, Syringe Barrel
Clamp Assembly and Top Disk Holder. These parts are not backwards
compatible with older versions of parts (reference figure to right).
Syringe Barrel
Clamp Assembly
Park Position Collar
7A-14
Alaris
Syringe Module (8110 Series)
®
Alaris
PCA Module (8120 Series)
®
Technical Service Manual
New Version
Top Disk Holder
These figures illustrate older versions of the Front Case,
Syringe Barrel Clamp Assembly and Top Disk Holder.
The newer version of Top Disk Holder
(reference figure to left) can be used with the
Front Case illustrated below . If the Front
Case requires replacement, it must be
replaced with the Front Case Assembly "Kit"
(Table
, item
).
7A-1
9
↓ ↓
Old Versions
If the Front Case, Syringe Barrel Clamp Assembly (or an
associated p art) or Top Disk Holder illustrated below require
replacement, they must be replaced with the Front Case
Assembly "Kit" (Table
, item
).
7A-1
9
↓ ↓