1.2.4.2
microSD Card Slot
A 2 GB microSD card is included with every EPOCH 650, but most types and
capacities of microSD cards can be used.
To install the microSD memory card
1.
Remove the card from its packaging.
2.
Loosen the two thumb screws, and then open the computer connection protective
cover (see Figure 1-19 on page 39).
3.
Hold the microSD card so that the metal pins face toward the front of the
instrument.
4.
Carefully slide the card into the microSD slot until it clicks.
To remove the microSD card
Carefully push the card into the instrument and release.
A spring mechanism partially ejects the card so you can grasp and remove it from
the instrument.
microSD card
microSD card slot
Side door
Figure 1-19 Installing the microSD card
DMTA-10055-01EN, Rev. A, February 2015
Hardware Overview
39