DMTA-10055-01EN, Rev. A, February 2015
5.
Press NEXT to highlight the Setup field.
6.
Press Ok (P1 key).
7.
In Create page two, press a parameter key (P1–P7) to select a type (see Figure 10-5
on page 196):
•
SEQ
•
SEQ+CP
•
2D
•
2DEPR
•
2D+CP
•
3D
•
BOILER
8.
Enter the required (and optional if desired) information for the selected type.
9.
Press NEXT to highlight the Create button.
10. Press Create (P1 key) to exit the setup page and create the file.
196
Chapter 10
Figure 10-5 Advanced (Create page two)