Figure 10-11 Select Id Page - Olympus EPOCH 650 User Manual

DMTA-10055-01EN, Rev. A, February 2015
Recalling a File ID
To bring saved data to the live screen, you must recall that particular file ID. For
incremental (INC) files, you must select the specific ID to be recalled. For calibration
(CAL) files, recalling the file automatically recalls the parameters in the single ID
saved in that file.
To recall a file ID
1. Choose File > Open, and then select the specific file that you want to view.
2. Press Contents (P3 key) to view the saved waveform and basic setup data.
The ID being viewed shows up at the top of the screen.
3. Press Select ID (P2 key) to display the Select ID page (see Figure 10-11 on
page 202).
4. Use the arrow keys or adjustment knob to select the ID you want to recall.
5. Press Select.
6. Choose Recall to recall the selected ID and bring the parameters to the live screen.
The notification "New setup recalled. Press any key to continue" displays at the
bottom of the screen.
7. Press any key on the instrument.
202 Chapter 10

Figure 10-11 Select ID page