Direct-Access Parameters; Figure 4-5 Example Of The Gain, Range, And Delay Direct-Access Parameters - Olympus EPOCH 650 User Manual

DMTA-10055-01EN, Rev. A, February 2015
4.3

Direct-Access Parameters

Direct-access parameters always appear at the top right corner of the display window.
This allows you to view these parameters from the main screen regardless of which
menu or parameter you are currently accessing. These parameters include Gain,
Range, Delay, and Gates.
To select and view the direct-access parameters
• Press the dB direct-access key to select the Gain parameter.
• Press the RANGE direct-access key to select the Range parameter.
• Press the GATES direct-access key to select the Gate parameters. The G1Start
parameter replaces the Delay parameter.
• Press the 2 ND
Once selected, the button turns green (see Figure 4-5 on page 76). Turn the adjustment
knob or press the Up and Down arrow keys to edit the value. For additional
information on gate adjustment, see "Quickly Adjusting Basic Gate Parameters" on
page 125.

Figure 4-5 Example of the Gain, Range, and Delay direct-access parameters

When you are using the gain, range, or delay direct access keys, a set of preset values
display over the parameter keys at the bottom of the screen (see Figure 4-6 on
page 77). These preset values allow you to jump to a particular setting with a single
button press, and can be customized (see "Editable Parameters Page" on page 102).
76 Chapter 4
F (DELAY) direct-access key to select the Delay parameter.
Press
Press
Press
GATES
to select
dB
to select
RANGE
, to select. Press
2 F (DELAY)
ND
to return to gate parameter