Figure 11-28 Waveform Averaging Option Setup - Olympus EPOCH 650 User Manual

DMTA-10055-01EN, Rev. A, February 2015
11.6.1 Waveform Averaging Setup
If the Waveform Averaging software option has been licensed on the instrument, it
can be activated at any time during standard operation.
To activate the Waveform Averaging software feature
1. Select Meas Setup > Special (group 3/5).
The Special screen appears (see Figure 11-28 on page 266).
2. In the Special menu, select Average.
3. Select the level of averaging.
4. Press to return to the live screen.
11.6.2 Using Waveform Averaging
When Waveform Averaging is on, the xAv flag (
alert you that the option is active (see Figure 11-29 on page 267).
266 Chapter 11

Figure 11-28 Waveform Averaging option setup

) is displayed in the flag area to