4.
Press
to return to the live screen.
10.4.1.4
Memo
The Memo parameter allows you to enter descriptive comments to include with
stored data. Memos can be used to provide further details about a measurement
condition or calibration. Memos can only be entered from the live screen. To add a
memo to a particular data file, open that file before creating the memo. To place a
memo in the database with a particular reading, enter it before saving the reading. To
place a memo in the database after saving an ID, enter it afterwards.
To add a memo
1.
Choose File > Memo (group 5/5)
2.
Press Edit (P1 key) and use the on screen keypad to add information (see
Figure 10-14 on page 205).
3.
For faster memo creation, press Dictionary (P2 key).
Figure 10-14 Memo setup page
DMTA-10055-01EN, Rev. A, February 2015
Data Logger
205