DMTA-10055-01EN, Rev. A, February 2015
11.10 Template Storage
Template storage provides a means of making a reference template of a scan, then
comparing template to the live A-scan. This option can be very useful for spot weld
inspection, and also for condition monitoring over time.
As all of UT testing is in some way a comparative test, template storage can be used in
many different applications to compare known conditions to unknown samples.
To activate template storage
1.
Choose the Template menu item (group 4/5).
2.
Press Setup (P7 key) to display the Template setup page (see Figure 11-48 on
page 293).
3.
Press On (P2 key) to turn template storage on.
4.
Turn Gain to On if you want gain adjustments to be active.
5.
To name the template, press Edit and create a name.
6.
Press Add to add the name to the list.
7.
Repeat steps 5 and 6 to add more template names.
NOTE
The first five templates names are shown above the parameter keys (P1–P5).
8.
Press
to return to the live screen.
292
Chapter 11