DMTA-10055-01EN, Rev. A, February 2015
To use the General setup page
1.
Choose Inst Setup (group 3/5).
2.
Press General (P1 key).
3.
Select the parameter you want to set up:
•
Language
Used to select the user interface language (English, Japanese, German,
French, Spanish, Russian, and Chinese).
•
Filter Group
Used to select receiver filter group.
•
Key Beep
Sounds an audible tone on every key press.
•
Alarm Beep
Used to activate an audible tone when a Gate Alarm is triggered.
•
Cal Lock
Used to lock access to all functions affecting calibration/waveform data. These
include: Basic, Pulser, Rcvr (receiver), and Trig settings, as well as Gain,
96
Chapter 4
Figure 4-16 The General Setup page