Resetting The Instrument; Figure 3-20 The Save Dialog Box - Olympus EPOCH 650 User Manual

DMTA-10055-01EN, Rev. A, February 2015
Two other file creation parameters are available and described below:
• Create: Creates the file in memory but does not open this file as the active
storage location. Typically used when creating several files at once without
saving data.
• &Open: Creates the file in memory, and then opens it as the active storage
location, but does not save any file parameters to the file until you press
2 ND F, (SAVE). This is typically used for inspection files, where the file is
created before the start of the inspection.
11. Press YES (P1 key) to accept the function and return to the live screen.
3.12.2

Resetting the Instrument

The EPOCH 650 allows you to reset its current settings to default values. This
capability is useful if you want to reset the instrument parameters, delete all the data
logger files, or reset the instrument back to its factory settings.
To reset the EPOCH 650
1. Choose Manage > Reset to display the Resets page (see Figure 3-21 on page 71).
70 Chapter 3

Figure 3-20 The Save dialog box