DMTA-10055-01EN, Rev. A, February 2015
12.2 Instrument Cleaning
When needed, wash the instrument only with mild soap and water on a damp cloth.
12.3 Verifying O-Ring Gaskets and Seals
The EPOCH 650 ultrasonic flaw detector contains seals that are used to protect the
instrument's internal hardware from the environment. These include:
•
Battery compartment cover seal
•
Side door seal
•
Membrane vent
•
Main o-ring seals between the top and bottom half of the instrument and the
aluminum heat-sink band
•
Conventional transducer gasket
Regularly clean and verify the state of the above seals and gaskets to ensure the
integrity of the hardware protection.
298
Chapter 12
Battery
Figure 12-1 Removing the lithium-ion battery
Pipe stand
Thumb screws
(2)
Battery
compartment
cover