DMTA-10055-01EN, Rev. A, February 2015
1.1.1
Adjustment Knob Configuration
The adjustment knob configuration provides smooth value slewing (see Figure 1-6 on
page 23). The adjustment knob is used along with the check key to adjust parameter
values in either coarse or fine increments.
The adjustment knob (
adjustable parameter.
The Check key (
fine (see Figure 1-5 on page 22):
•
Coarse adjustment is active when the highlighted parameter is surrounded by
brackets.
•
Fine adjustment is active when there are no brackets.
Figure 1-5 Coarse (left) and fine (right) adjustment selection
The Escape key (
•
When in a setup page,
•
When in a selected menu,
•
When a direct access parameter (gain, range, gates, etc.) is selected,
the previous menu.
The direct access keys cause the software interface to jump directly to the associated
parameter or activate a function (see "Direct-Access Keys" on page 28).
22
Chapter 1
) increases or decreases the value of a highlighted
) toggles a highlighted adjustable parameter between coarse and
) has three primary functions:
returns to the live inspection screen.
returns to the basic menu.
returns to