Figure 10-4 Creating Advanced File Type - Olympus EPOCH 650 User Manual

You can also choose &Open (P2 key) to create and open the file in a single step, or
&Save (P3 key) to create, open, and save the current settings to the current file in
a single step.
Once a file is created, you must open the file before trying to save information. This is
a separate function from Create. See "Selecting a File as the Active Storage Location."
on page 197 for instructions on how to open a file.
To create Advanced files
1. Choose File > Create (group 5/5) to open the Create setup page (see Figure 10-4
on page 195).
2. Press Advanced (P3 key) to select the Advanced file type.
3. Press NEXT to highlight the Filename field and enter a file name.
4. Enter optional information in the Description, Inspector ID, and Location Note
fields.

Figure 10-4 Creating advanced file type

DMTA-10055-01EN, Rev. A, February 2015
Data Logger 195