DMTA-10055-01EN, Rev. A, February 2015
To use the Reading setup page
1.
Choose Meas Setup (group 3/5).
2.
Press Reading Setup (P1 key).
3.
Select the parameter you want to set up.
•
Reading Selection
Sets the measurement reading box mode.
— Auto: Automatically makes the selection based on instrument function
— Manual: Readings correspond to the manually defined selections
•
Reading1 to Reading5
Each measurement reading box is defined independently when in manual
mode. Figure 4-14 on page 91 shows an example of the measurement reading
boxes and icons that indicate what type of measurement is being displayed.
Table 13 on page 92 presents the available measurement readings.
Figure 4-15 Example of measurement reading boxes with icons
Icon
Measurement reading
Gate 1 Thickness
Gate 2 Thickness
Gate 1 Soundpath Distance
Gate 2 Soundpath Distance
92
Chapter 4
Reading 1
Reading 3
Reading 2
Reading 4
Table 13 Available measurement readings
Reading 5
Description
Thickness in gate 1. Not used with Angle.
Thickness in gate 2. Not used with Angle.
Sound Path (Angular) distance in gate 1.
Sound Path (Angular) distance in gate 2.