Figure 3-13 The Auto Cal Menu - Olympus EPOCH 650 User Manual

5. Select the Type parameter, then select the appropriate calibration type (Thickness
for straight beam or Soundpath for angle beam are the most common).
6. Select Cal-Zero.
7. Adjust the displayed value to the appropriate thickness. For this example, the
transducer is coupled to a 5 mm (0.200 in.) step (see Figure 3-14 on page 64).

Figure 3-13 The Auto Cal menu

DMTA-10055-01EN, Rev. A, February 2015
Software Overview 63