Usb Client Port; Figure 1-18 The Connectors Behind The Protective Cover - Olympus EPOCH 650 User Manual

DMTA-10055-01EN, Rev. A, February 2015
Thumb screws (2)

Figure 1-18 The connectors behind the protective cover

1.2.4.1

USB Client Port

The EPOCH 650 ultrasonic flaw detector comes standard with one USB port currently
used for PC client communication. The USB client port allows one-way
communication only. A peripheral device can pass commands to the EPOCH 650, but
the EPOCH 650 cannot pass commands to a peripheral device.
To connect any device (including a personal computer) to the EPOCH 650, an
appropriate USB cable is required.
Do not expose the instrument to harsh and wet environments while the computer
connection protective cover is opened. To prevent connector corrosion and damage to
the instrument, keep the computer connection protective cover closed and sealed
when no cable is connected.
38 Chapter 1
microSD card slot
USB client port