Operation; Exhalation Relief Softpap - Weinmann homecare SOMNOsoft + WM 24600 Description And Operating Instructions

5. Operation

5.1 Exhalation relief softPAP

If your physician has enabled the softPAP function, you can choose between two softPAP
stages or deactivate the softPAP function.
Selecting softPAP stage
soft 0 = softPAP off
soft 1 = softPAP slight
= softPAP normal
soft 2
If the current softPAP setting does not flash, your physician has disabled it. In this case
you cannot change the setting.
2. Press the On/Off button
"soft 2" appears in the display.
The setting "soft 1" reduces the therapy pressure slightly during exhalation, while
"soft 2" (normal) reduces it further.
If no button is pressed for 5 seconds, this display disappears and the display again shows
"0".
Deactivating softPAP
= softPAP off
soft 0
= softPAP slight
soft 1
= softPAP normal
soft 2
If the current softPAP setting does not flash, your physician has disabled it. In this case
you cannot change the setting.
2. Press the On/Off button
exhalation relief is now deactivated.
If no button is pressed for 5 seconds, this display disappears and the display again shows
"0".
1. With the SOMNOsoft + switched off, press the Softstart
button until the current softPAP setting flashes in
25
the display.
repeatedly until the desired softPAP stage "soft 1" or
24
1. With the SOMNOsoft + switched off, press the Softstart
button until the current setting "soft 1" or
25
"soft 2" flashes in the display.
repeatedly until "soft 0" appears in the display. The
24
Operation 13