Browse Arp Table; Session Table - D-Link xStack DGS-3400 Series Reference Manual

x Stack
Severity Tick the check boxes to specify the severity to be displayed.
Sequence
A counter incremented whenever an entry to the Switch's history log is made. The table displays
the last entry (highest sequence number) first.
Time Displays the time in days, hours, and minutes since the Switch was last restarted.
Log Text
Displays text describing the event that triggered the history log entry.
The Switch can record event information in its own logs, to designated SNMP trap receiving stations, and to the PC connected to
the console manager. Click Next to go to the next page of the Switch History Log. Click Clear will allow the user to clear the
Switch History Log.

Browse ARP Table

This window will show current ARP entries on the Switch. To search a specific ARP entry, enter an interface name into the
Interface Name, an IP Address or a MAC Address, and click Find. To clear the ARP Table, click Clear All.
To view this table, click Monitoring > Browse ARP Table, as shown below.

Session Table

This window is used to display the current session table.
To view this window, click Monitoring > Session Table, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 7 - 38 ARP Table window
403