Static Arp Table - D-Link xStack DES-3800 Series User Manual

Static ARP Table

The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows
network managers to view, define, modify and delete ARP information for specific devices. Static entries can be defined in the
ARP Table. When static entries are defined, a permanent entry is entered and is used to translate IP address to MAC addresses.
To open the Static ARP Table open the L3 Features folder and click on the Static ARP Settings link.
To add a new entry, click the Add button, revealing the following window to configure:
The following fields can be set:
Parameter
IP Address
MAC Address
After entering the IP Address and MAC Address of the Static ARP entry, click Apply to implement the new entry. To completely
clear the Static ARP Settings, click the Clear All button.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 10. Static ARP Settings window
Figure 8- 11. Static ARP Table – Add window
Description
The IP address of the ARP entry.
The MAC address of the ARP entry.
NOTE: The Switch supports up to 255 static ARP entries.
113