Lldp > Lldp Management Address Settings; Lldp > Lldp Statistics Table - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Figure4.138 – LLDP > 802.3 Extension LLDP Port Settings
From Port/To Port: Select a range of ports to be configured.
MAC/PHY Configuration/Status: Select either Enabled or Disabled.
Maximum Frame Size: Select either Enabled or Disabled.
Once configured click Apply to implement changes made and click Refresh to refresh the table information.
LLDP > LLDP Management Address Settings
The LLDP Management Address Settings allows you to set management address which is included in LLDP
information transmitted.
Figure4.139 – LLDP > LLDP Management Address Settings
From Port/To Port: Select a range of ports to be configured.
Address Type: Specify the LLDP address type on the port. The value is always IPv4.
Address: Specify the address.
Port State: Select either Enabled or Disabled.
Click Apply to implement changes made.
LLDP > LLDP Statistics Table
The LLDP Statistics page displays an overview of all LLDP traffic.
8 8 5 5