L2 Features > Lldp > Lldp Management Address List - D-Link DMS-1100-10TS User Manual

The fields that can be configured for the LLDP Port Settings are described below:
Item
From Port/ To Port
Subtype
Admin Status
IP Subtype
Action
Address
Click Apply to make the configurations take effect.
L2 Features > LLDP > LLDP Management Address List
The LLDP Management Address List page displays the detailed management address information for the
entry.
Figure 4.100 – L2 Features> LLDP > LLDP Port Settings
Description
Select the range of ports to be configured.
Select the subtype of LLDP Type Length Value (TLV). Options to
choose from are MAC Address, and Local.
Select the LLDP transmission mode on the port. The available options
are:
◆
TX: Enables transmitting LLDP packets only.
◆
RX: Enables receiving LLDP packets only.
◆
TX and RX: Enables transmitting and receiving LLDP packets.
This is the default value.
◆
Disabled: Disables LLDP on the port.
Select the type of the IP address information to be sent. Options to
choose from are All, IPv4 and IPv6.
Select to remove or add the action field.
Enter the IP address to be sent.
Table 4.73
Figure 4.101 – L2 Features > LLDP >LLDP Management Address List
D-Link DMS-1100 Series User Manual
80