Statically Assign An Ip Address - D-Link DIR-822K User Manual

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7- Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adaptor Options
Windows® 8,10 - Click on Start > Search for Control Panel > Network and Internet > Network and Sharing Center > Change adaptor settings.
Step 2
Right-click on the Local Area Connection/ Ethernet which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol version 4 (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or
the LAN IP address on your router.
Example: If the router´s LAN IP address is 10.0.0.2, make your IP address 10.0.0.X where X is a number
between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default
Gateway the same as the LAN IP address of your router (I.E. 10.0.0.2).
Set Primary DNS the same as the LAN IP address of your router (10.0.0.2). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
89