DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 7- 20. Multicast Address Group List Settings window
Enter the multicast IP address list, starting with the lowest in the range, and then click Add. To return to the IP Multicast Profile
Settings window, click the <<Previous button.
Limited Multicast Address Range Settings
The Limited Multicast Address Range Settings window enables the user to configure the ports on the switch that will be
involved in the Limited IP Multicast Range. The user can configure the range of multicast ports that will be accepted by the
source ports to be forwarded to the receiver ports. To configure these settings, click L2 Features > IGMP Snooping > Limited
Multicast Address Range Settings:
Figure 7- 21. Limited Multicast Address Range Settings window
To add a new range, enter the appropriate information and then click Add. To delete an entry, enter the information and click
Delete.
Max Multicast Group Settings
The Max Multicast Group Settings window enables the user to configure the ports on the switch that will be a part of the
maximum filter group, up to a maximum of 256. To configure these settings, click L2 Features > IGMP Snooping > Max
Multicast Group Settings:
91