Table of Contents
Advertisement
D-Link DGS-1100-10/ME User Manual
Figure4.78 - Configuration > Multicast Forwarding & Filter > Multicast Filter Mode
From Port / To Port: Specify the ports of the VLAN on which the corresponding MAC address belongs to.
Multicast Filtering Mode: Select an action from the drop-down menu when the Switch receives a multicast
packet that is to be forwarded to one of the ports in the range specified above.
Forward Unregistered Groups - This will instruct the Switch to forward a multicast packet whose
destination is an unregistered multicast group residing within the range of ports specified above.
Filter Unregistered Groups - This will instruct the Switch to filter any multicast packets whose destination is
an unregistered multicast group residing within the range of ports specified above.
Configuration > Multicast Forwarding & Filter > IP Multicast Profile Settings
The IP Multicast Profile Settings page allows you to configure the IP Multicast Profile.
Profile Type: Select either IPv4 or IPv6.
Profile ID: Select the Profile ID.
Profile Name: Enter a Profile Name.
Click Add to create a new IP Multicast Profile or click Delete All to clear all the entries.
Configuration > Multicast Forwarding & Filter > Limited Multicast Range Settings
The Limited Multicast Range Settings page allows you to configure the Limited Multicast. Specify the port
range, select the Access IP Type (IPv4 or IPv6), and select to permit or deny access. Click Apply to
implement changes made.
Figure 4.79 - Configuration > IGMP Snooping > IP Multicast Profile Settings
5
5
0
0
Hide quick links:
Advertisement
Table of Contents
