Sbc Parameters - AudioCodes Mediant 800B User Manual

User's Manual

67.12 SBC Parameters

The SBC and CRP parameters are described in the table below.
Parameter
CRP-specific Parameters
CRP Application
configure voip > application >
enable-crp
[EnableCRPApplication]
CRP Survivability Mode
configure voip > sbc settings > crp-
survivability-mode
[CRPSurvivabilityMode]
configure voip > sbc settings > crp-
gw-fallback
[CRPGatewayFallback]
SBC-specific Parameters
Enable SBC
configure voip > application >
enable-sbc
[EnableSBCApplication]
SBC and CRP Parameters
Unclassified Calls
configure voip > sbc settings >
unclassified-calls
[AllowUnclassifiedCalls]
SBC Max Call Duration
Version 7.2
Table 67-73: SBC and CRP Parameters
Enables the CRP application.

[0] Disable (default)

[1] Enable
Note: For the parameter to take effect, a device reset is
required.
Defines the CRP mode.

[0] Standard Mode (default)

[1] Always Emergency Mode

[2] Auto-answer REGISTER
Enables fallback routing from the proxy server to the Gateway
(PSTN).

[0] = Disable (default)

[1] = Enable
Enables the Session Border Control (SBC) application.

[0] Disable (default)

[1] Enable
Note:

For the parameter to take effect, a device reset is required.

In addition to enabling the parameter, the number of
maximum SBC/IP-to-IP sessions must be included in the
License Key.
Determines whether incoming calls that cannot be classified
(i.e. classification process fails) to a Source IP Group are
rejected or processed.

[0] Reject = (Default) Call is rejected if classification fails.

[1] Allow = If classification fails, the incoming packet is
assigned to a source IP Group (and subsequently
processed) as follows:

The source SRD is determined according to the SIP
Interface to where the SIP-initiating dialog request is
sent. The source IP Group is set to the default IP Group
associated with this SRD.

If the source SRD is ID 0, then source IP Group ID 0 is
chosen. In case of any other SRD, then the first IP
Group associated with this SRD is chosen as the source
IP Group or the call. If no IP Group is associated with
this SRD, the call is rejected.
Defines the maximum duration (in minutes) per SBC call
1207
67. Configuration Parameters Reference
Description
Mediant 800B Gateway & E-SBC