Toshiba e-STUDIO520 Service Handbook page 403

[E870] RADF open jam
Is the connector CN11 on the ADF board disconnected?
YES
NO
Is the harness between the ADF board and RADF open/close sensor open-circuited?
YES
NO
Is the RADF open/close sensor working improperly?
YES
NO
Is the harness between the ADF board and APS operation sensor open-circuited?
YES
NO
Is the APS operation sensor working improperly?
YES
NO
Replace the ADF board.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Connect the connector.
Replace the harness.
Replace the RADF open/close sensor.
Replace the harness.
Replace the APS operation sensor.
5 - 41
e-STUDIO520/523/600/603/720/723/850/853
TROUBLESHOOTING
5