Toshiba e-STUDIO520 Service Handbook page 522

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO520:
Table of Contents

Advertisement

4) Description of each ID
ID
01
Read Error Rate
02
Throughput Performance
03
Spin Up Time
04
Spin Start/Stop Count
05
Re-allocated Sector Count
07
Seek Error Rate
08
Seek Time Performance
09
Power-On Hours
0a
Spin Retry Count
0c
Power Cycle Count
c0
Power off Retract Count
c1
Load Cycle Count
c2
Temperature
c3
ECC On the Fly Count
c4
Reallocation Event Count
c5
Current Pending Sector Count
c6
Off-Line Scan Uncorrectable Sector Count
c7
Ultra DMA CRC Error Count (Rate)
c8
Write Error Rate
e-STUDIO520/523/600/603/720/723/850/853
TROUBLESHOOTING
Name
This attribute is a measure of the read error rate.
This attribute is a measure of the throughput performance.
This attribute is a measure of how quickly the drive is able to
spin up from a spun down condition.
This attribute is a measure of the total number of spin ups
from a spun down condition.
This attribute is a measure of the total number of reallocated
sectors.
This is a measure of the seek error rate.
This attribute is a measure of a drive's seek performance dur-
ing normal online operations.
This attribute is a measure of the total time (hours or minutes
depending on disk manufacturer) the drive has been on.
This attribute is a measure of the total number of spin retries.
This attribute is a measure of the number of times the drive
has been turned on.
This attribute is a measure of the total number of emergency
unloads.
This attribute is a measure of the total number of load/
unloads.
This attribute is a measure of the temperature in the HDD.
This attribute is a measure of the total number of the ECC On
the Fly.
This attribute is a measure of the total number of the reallo-
cation events.
This attribute is a measure of the total number of candidate
sectors to be reallocated.
This attribute is a measure of the total number of uncorrect-
able sectors found during the off-line scan.
This attribute is a measure of the total number of errors found
in data transfer in the Ultra-DMA mode.
This attribute is a measure of the write error rate.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
5 - 160
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents