Toshiba e-STUDIO520 Service Handbook page 54

• Test mode (03): Refer to
check (test mode 03)".
• Test print mode (04): Refer to
• Adjustment mode (05): Refer to
• Setting mode (08): Refer to
• List print mode (9S): The procedure varies depending on the code.
[9][START]
(Code)
[POWER]
101: Adjustment mode (05)
102: Setting mode (08)
(Code)
103: PM support mode
104: Stored information of pixel counter (toner cartridge reference)
105: Stored information of pixel counter (service technician reference)
106: Error history (Maximum 1000 items)
107: Error history (Latest 80 items)
• PM support mode (6S):
[6][START]
[POWER]
• Firmware update mode (89): Refer to "6. FIRMWARE UPDATING".
Normal
Control panel
Warming up
check mode
Ready
[POWER]
OFF
*1
To user
*1 Turn OFF the power after using the self-diagnosis modes, and leave the equipment to the user.
e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
P.2-29 "2.2.1 Input check (Test mode 03)" and
P.2-40 "2.2.3 Test print mode (test mode 04)".
P.2-41 "2.2.4 Adjustment mode (05)".
P.2-74 "2.2.5 Setting mode (08)".
[START] [Digital keys]
Key in the first
code to be printed
(Code)
1: Auto-toner adjustment
2: PM Support Screen
[POWER]
ON
[0][1] [0][3] [0][4]
Test print Adjustment
Test mode
mode
State transition diagram of self-diagnosis modes
[START] [Digital keys]
Key in the last
code to be printed
[START]
(Operation started)
[0][5] [0][8] [9][START]
List print
Setting
mode mode
mode
Fig. 2-1
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
2 - 28
P.2-36 "2.2.2 Output
[START] [POWER] OFF/ON
List starts to (Exit)
be printed
[POWER] OFF/ON
(Exit)
[6][START] [8][9]
Firmware
PM support
update mode
mode