Toshiba e-STUDIO520 Service Handbook page 239

• Adjustment by direct code entry
As for the codes shown in the table below, the paper alignment at the registration roller can be adjusted
by a direct entry with the digital keys.
(For codes not shown in this table, perform the adjustment with the touch panel.)
Paper
Weight
type drawer
Plain 450 (*1)
2
64-80 g/m
paper
17-20 lb.
Thick 469 (*1)
2
81-105g/m
paper 1
21-28 lb.
Thick 2
106-163g/m
paper 2
29-43 lb.
Thick
2
164-209g/m
paper 3
44-55 lb.
OHP -
Sub-code
(*1) 0: Long size 1: Middle size 2: Short size1 3:Short size 4:Post card
(*2) 0: Long size of OHP film 1: Middle size of OHP film 2: Short size1 of OHP film
3: Short size 2 of OHT film 4:Post card size of OHP film
Notes:
1. Long size: 330 mm or longer (13.0 inches or longer)
Middle size: 220-239 mm (8.7-12.9 inches)
Short size1: 205-219 mm (8.1-8.6 inches)
Short size2: 160-204 mm (6.3-8.0 inches)
Post card: 159 mm or shorter (6.2 inches or shorter)
2. The adjustment of "Post card" is for Japan only.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
1st 2nd 3rd
drawer drawer
452 (*1) 448 (*1)
470 (*1) 471 (*1)
- - -
- - -
- - -
3 - 7
4th Tandem Duplexing
drawer LCF (ADU)
449 (*1) 457 455 (*1)
472 (*1) 473-0 474 (*1)
- 473-1 -
- 473-2 -
- 473-3 -
e-STUDIO520/523/600/603/720/723/850/853
Option Bypass
LCF feed(SFB)
- 458 (*1)
- 460 (*1)
- 461 (*1)
- 462 (*1)
- 463 (*2)
ADJUSTMENT
3