Toshiba e-STUDIO520 Service Handbook page 247

<Procedure>
(1) While pressing [0] and [5] simultaneously,
turn the power ON.
(2) Press [FAX] to make a copy of any image on
a sheet of A3/LD paper.
(3) Key in [308] and press the [START] button to
move the carriage to the adjustment position.
(4) Remove the original glass.
(5) Make an adjustment in the order of step 1
and 2.
• Step 1
- In case of A:
Tighten the mirror-3 adjustment screw
(CW).
- In case of B:
Loosen the mirror-3 adjustment screw
(CCW).
• Step 2
- In case of C:
Tighten the mirror-1 adjustment screw
(CW).
- In case of D:
Loosen the mirror-1 adjustment screw
(CCW).
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Adjustment screw for the mirror-3
Fig. 3-14
Adjustment screw for the mirror-1
Fig. 3-15
e-STUDIO520/523/600/603/720/723/850/853
3 - 15
Carriage-2
Carriage-1
ADJUSTMENT
3